Spec sheet Reversing Solenoid
Part number 24450

Useful for control of reversing motors such as hoists, winches, windlasses and snowplow blades.Two solenoids in one for cost savings and simpler wiring.

Voltage: 12V DC. Max operating voltage 14.5V DC.
DPDT intermittent duty.
Contacts: Copper
F type bracket
Large studs: 5/16" -24
Coil terminals: two blades
Coil type: common ground

Two integral solenoids provide dynamic braking for permanent magnet motors when neither coil is energized.

12V DC 75A make and break, max On time 5min.
12V DC 125A make and break, max On time 30sec.
12V DC 150A make and break, max On time 0.5sec.
Allow 5min Off after max On time.

Use in conjunction with a SPDT momentary switch: pushbutton, rocker (such as 58027-04), toggle (such as 55021), rotary switch (such as 72154-01/02) or ignition-type keyed switch (such as 75705-01).

Information sheet
on Plastic-Body (glass-filled nylon) Solenoids, D-596