48510 SureStart Low Voltage Disconnect Switch, 200A
No more dead batteries!
200A at 12V DC
Ensures ample starting capacity and prolongs battery life. Automatically disconnects non-critical loads from a battery when the battery voltage falls below a predefined threshold. Automatically reconnects the loads to the battery when it is being charged.
Manual override permits a user to make or break the connection, regardless of battery voltage.
Overcurrent, short circuit and over-temperature protection.
No more stranded vehicles! Avoid the time and expense of getting your vehicles towed. The SureStart LVD ensures there’s enough power to start, and saves the batteries on vehicles that aren’t used every day.
6.0"L x 5.1"W x 3.0"H (152.4 x 130.2 x 76.2mm).
Environmental: -40 degC to 85 degC. SAE J1455 & J1113.
Electrical: 200A continuous.
Current inrush: 500A (for 5 seconds).
2mA max quiescent current.
Ignition-proof to ISO 8846.
Disconnects when battery drops below 12.1V for 2 minutes, reconnects when battery meets or exceeds 13.0V for 10 seconds.
Alarm: Active low, 50mA. Activates 1 minute before disconnect.
Electronics sealed to IP67.
| Property | Value |
|---|---|
| Description | LVD Low Voltage disconnect switch |
| Action | Diconnects below 12.1V battery for 2 mins; reconnects when battery is at 13.0V for 10 seconds |
| Temperature Range | -40C to 85C per SAE J1455 & J1113 |
| Rating | 200A at 12V DC |
| Terminals | Two studs & 4 wires |
| Electrical | 200A continuous, inrush 500A for 5 seconds |
| Sealing | Unit is potted, sealed to IP67 |
| Quiescent current | 2mA max |
| Ignition-proof | Yes to ISO 8846 |
| UL listed | No |
| Min qty |

