48610 FlexMod LVD (Low Voltage Disconnect Switch)
LVD: Makes sure your vehicles will always start!
10A at 12V DC, 12-32V.
Automatically disconnects specified loads when unit senses that vehicle battery is too low; automatically reconnects when voltage is restored.
Unit is auto-ranging - it senses 12 or 24V systems.
Size: 4.0 x 2.7 x 1.3" (102 x 69 x 33mm)
Unit protects circuit against overvoltage and overcurrent. System will disconnect load after 1 sec of excessive current, and auto-recover after 10 seconds.
Quiescent current 1mA typical, 2mA max.
| Property | Value |
|---|---|
| Description | Low Voltage Disconnect Switch |
| Dimensions | 4 x 2.7 x 1.31" (101.6 x 68.6 x 33.3mm) |
| Voltage | 12 or 24V DC autoranging |
| Standby current | 1mA |
| Connector | 8-pin sealed Deutsch type (not supplied, but supplied with 48610-01) |
| Operating temperature range | -40degC to +85degC (-40degF to +85degF) |
| Ingress protection | IP67 per IEC 529 |
| Humidity | 0 to 90 %RH |
| Vibration | 10-500Hz per SAE J1455 |
| Shock | per SAE J1455 |
| Thermal shock | per SAE J1455 |
| Inductive transient | +/- 600V per SAE J1455 |
| Load dump | + 150V per SAE J1455 |
| Disconnect voltage (12V) | 12.05V min, 12.1V typ, 12.15V max |
| Disconnect voltage (24V) | 24.1V min, 24.2V typ, 24.3 max |
| Load current | 10A at 85degC max |
| Overcurrent protection | 15A |
Related Products
|
|
|
|