Faceplate only: does not include switch.
Needs to be countersunk in a 2" (50.8mm) hole. 3 3/16" (81.0mm) diameter with three 7/32" (5.6mm) holes on a 2 3/4" (69.9mm) diameter circle. Requires a clearance depth of .890" (22.6mm), not including clearance for a switch. Other colors, metals and finishes are available on special order. Contact Cole Hersee.

Switch guards help prevent accidental actuation of a toggle switch and protect it from damage.

Typical uses:

• Switch is in a vulnerable position – 
• like a light switch in a truck cargo section.
• Switch controls a vital function that must not be accidentally operated – like the hose return switch on an oil truck.
• Switch is important, but infrequently used –
  like an emergency switch.