95060 Sealed Key Switch, 4-position
10A at 12V, 5A at 24V, 3A at 36V and 2A at 48V DC.
Four positions: Accessory - Off - Ignition/Accessory - Start. Spring return to Off.
Keyswitch is constructed from engineering thermoplastic and is fully sealed using O-rings and ultrasonic welding to protect switch to IP67 (with connector installed). Accepts Deutsch-type connector.
Plastic facenut and nickel-plated brass backing nut. Supplied with two matching keys. With protective key boot.
Matching harness kit #31101.
# 95061 is identical, except it has a lever actuator.
# 95060-23 is identical, except it has a single key code.
# 95060-50BP is identical, except it hais packaged and includes a 31101 harness.
Offsite info on Marine Ignition Switch wiring
See the HOT FEED sheet in the LITERATURE section below to see the range of 95060 switches we offer.
|Contact ratings||10A at 12V, 5A at 24V, 3A at 36V, 2A at 48V DC|
|Number of key positions||Four|
|Spring return to Off||Yes|
|With key boot||Yes|
|O-Ring seal in stem||Yes. Sealed to IP67|
|Ignition-proof||Yes. Tested to SAE J259|
|Case material||Engineering thermoplastic|