Rocker Switches

M-58031-01 SPST On-Off Rocker Switch

20A at 12V, 15A at 24V DC. Switches with LED pilot lights must be used at the stated voltage only. M-58031 switches have a black actuator; 58332 switches are supplied in retail BP only and are supplied with one black and one gray snap-on actuator.These general-purpose switches are suitable for all kinds of applications. They are weather-resistant with contact areas sealed to IP66 (high pressure wash-resistant). Switches are uniform with Round Pilot Light series of switches and are recognized at UL 1500 (Ignition protection for marine products). With neoprene gasket/panel seal. These switches conveniently snap into a standard rectangular mounting hole 1.48" x 0.83" (36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm). Plastic housing, bezel and actuator. Silver contacts, Brass blade terminals. Imprinting available.

Wiring your switch: There are up to 8 terminals on this series of switches. Identify each type of switch by matching it with the appropriate wiring diagram in each section. Diagrams represent the switch as seen from the back.

Single Pole, Single Throw. Two Blade Terminals.

  • Blister Pak
PropertyValue
PropertyValue
Switch typeRocker
DescriptionWeather-Resistant Rocker Switch, rocker sealed
CircuitrySPST
Electrical rating20A at 12V DC
ContactsSilver
HousingPlastic, Black
Up positionOff
Center positionnone
Down positionOn
Terminals2 blade
Actuator materialPlastic
Actuator typeRocker
Actuator: inches1.940" x .940"
Actuator: mmWeather-Resistant Rocker Switch, rocker sealed
Actuator colorBlack
Actuator imprintNone
IlluminatedNo
Lens 1 colorNot applicable
Lens 2 colorNot applicable
Lens 1 sizeNot applicable
Lens 2 sizeNot applicable
Lens 1 imprintNone
Lens 2 imprintNone
Imprint colorNone
Bezel typeNot applicable
Bezel sizeNot applicable
MountingPanel snap-in
Panel thickness.040" (1.01mm) to .100" (2.54mm)
Mounting hole: inches1.45" x .830"
Mounting hole: mm36.83mm x 21.08mm
Min qtyNo

More