Resource Center
New Products
Cole Hersee has a long history of innovation. Check out our new FlexMod electronic control modules such as the 48610 Low Voltage Disconnect Switch that's a mere 4 x 3 x 1" size!
Sealed Key Switches
95060 series Sealed Key Switches for ignition or general purposes.
Switches can be used for many purposes where the function needs to be secured with a tumbler lock. Switches are especially suitable as ignition switches.
- 10A at 12V DC
- 5A at 24V DC
- 3A at 36V DC
- 2A at 48V DC
Surestart Automatic Low Voltage Disconnect Switch
No more dead batteries!
SureStart LVD (Low Voltage Disconnect Switch) electronically senses battery voltage and conserves starting power. Prolongs battery life by preventing battery damage.
- 48510 200A at 12V DC
- 48512 150A at 12V DC
FlexMod™
No more dead batteries! Versatile electronic units conserve vehicle starting power.
There are four new products in the new compact FlexMod line.
- 48610 Low Voltage Disconnect Switch
- 48636 Timer for interior lighting
- 48540 Smart Battery Isolator Controller
- 48541 Voltage sensing Relay & Timer
Learn more about each product by clicking on the product number.
Master Battery Disconnect Switch
75920 Master Disconnect Switch is ruggedly built from engineering grade plastic.
75920 Master Disconnect Switch switch handles up to 300A. It's sealed to IP67 and it accepts a padlock for lockout/tagout. Knob rotates a full 90 degrees from Off to On, so it's easy to give a visible check on switch status; solid detents make it easy to feel when switch is turned from Off to On. Large know is easy to handle, even with gloved hands.
LED Rockers
Rocker Switches with super-bright LEDs, high-visibility wrap-around lenses.
Series 58312 Rockers are available in many electrical configurations and pilot light color combinations.
25A at 12V DC. Switches snap into standard rocker switch holes in the panel.
Forward & Reverse Relay Module
Ideal for tailgate lifts, hoists, tarping, winches, and all reversing motor applications.
2242 Forward & Reverse Relay Module is fully sealed to withstand the elements. The unit automatically reverse the direction of the motor when the control circuit is triggered. Dynamic braking stops the motor when the control switch is turned to Off.
Perfect for all motors that impart a forward/reverse, up/down, in/out, blow/exhaust or left/right motion - tarping systems, snowplows, winches/windlasses, outrigger operation, intake/exhaust and many other applications.
M-750. The Heavyweight
The M-750 Battery Selector and Master Disconnect Switch.
The largest amp capacity per dollar over any competitive switch - 500A intermittent/310A continuous, 6-36V DC.
Provides a sure and reliable battery disconnection to protect against electrical fire, tampering, vehicle theft, and battery drain. Model M-751 is lockable.
UL and CE rated. Conforms to USCG regs for ignition protection.
The M-75X series combine features of Battery Selectors and Master Disconnects to give four battery power options:
- Power cutoff at source.
- Power On, Battery 1.
- Power On, Battery 2.
- Power On, both Batteries.
The Heavyweight.
Best value. Solidly built with heavy copper contact plates and 3/8"-24 copper studs.
Distinctive green color makes recognition easy.
Accepts all 7-pole plugs that conform to SAE J560b standard.
Long-lasting glass-fiber reinforced plastic stands up to tough conditions. Spring-loaded socket door closes tightly to exclude dirt and roadsplash.
Solid brass terminals provide superior electrical contact, and hold the plug securely in place.
PDF HotFeed informational sheets.
Electronic Solenoid 48785
48785 Solid-state Solenoid - no moving parts to fail or wear out.
Can be used at 9V through 31V DC. Rated for continuous current at 85Amps.
- Fully electronic switching - no damaging arcing.
- Fully resistant to vibration or shock which would damage conventional solenoids.
- Withstands contamination from moisture, dist, roadsplash/salt spray.
- Needs only a low control curent to operate.
- Can be used in high side or low side installations.
- Tested to 1,000,000 cycles.
- Hot Feed informational sheet D-579
Use it as a regular Normally Off Relay or as a Latching Relay
One unit; two purposes. User can connect as a Latching Relay/Solenoid or a Normally Off Relay/Solenoid.
- 200A continuous at 12V DC.
- Ingress protection to IP67.
Solid-state reliablity - withstands conditions that would 'kill' an electromechanical solenoid.
- HotFeed PDF sheet D-623